|
質問 |
答え |
What is static resistance? 学び始める
|
|
It is the resistance calculated using Ohm's law as the slope of the V-I curve from the origin to a working point.
|
|
|
What is dynamic resistance? 学び始める
|
|
It is the small-signal resistance calculated from the change in voltage over the change in current (ΔV/ΔI) at a specific point.
|
|
|
How does temperature affect a standard resistor? 学び始める
|
|
Resistance increases with temperature due to its positive thermal coefficient.
|
|
|
What is a varistor used for? 学び始める
|
|
To protect circuits from overvoltage by decreasing resistance sharply above a threshold.
|
|
|
What does a strain gauge measure? 学び始める
|
|
Mechanical strain, by detecting resistance changes when a conductor is stretched.
|
|
|
How does a thermistor respond to temperature? 学び始める
|
|
Its resistance changes with temperature: NTC decreases resistance, PTC increases it.
|
|
|
What is the function of a photoresistor? 学び始める
|
|
To measure light intensity; resistance decreases as light exposure increases.
|
|
|
State Kirchhoff's Current Law (KCL). 学び始める
|
|
The total current entering a node equals the total current leaving it.
|
|
|
State Kirchhoff's Voltage Law (KVL). 学び始める
|
|
The sum of voltages around any closed loop equals zero.
|
|
|
How does a capacitor behave with frequency? 学び始める
|
|
In AC, impedance decreases with frequency; in DC, it acts like an open circuit.
|
|
|
Define capacitive reactance. 学び始める
|
|
Xc = 1 / (2πfC); it measures how a capacitor resists AC.
|
|
|
What affects capacitance? 学び始める
|
|
Plate area, distance between plates, and dielectric constant of material.
|
|
|
How does an inductor store energy? 学び始める
|
|
In a magnetic field created by current flowing through it.
|
|
|
Define inductive reactance. 学び始める
|
|
XL = 2πfL; it increases with frequency, impeding AC.
|
|
|
|
学び始める
|
|
Voltage across a conductor due to a magnetic field acting on moving charges.
|
|
|
What is semiconductor doping? 学び始める
|
|
Introducing impurities to create free carriers in a semiconductor.
|
|
|
How is an N-type semiconductor formed? 学び始める
|
|
By adding atoms with more valence electrons, providing free electrons.
|
|
|
How is a P-type semiconductor formed? 学び始める
|
|
By adding atoms with fewer valence electrons, creating holes.
|
|
|
What is the depletion layer? 学び始める
|
|
A non-conductive region at a PN junction where charge carriers cancel out.
|
|
|
What is forward bias in a diode? 学び始める
|
|
Positive voltage on the anode reduces the depletion layer, allowing current.
|
|
|
What is reverse bias in a diode? 学び始める
|
|
Voltage increases the depletion layer, blocking current flow.
|
|
|
What is the typical forward voltage for a silicon diode? 学び始める
|
|
|
|
|
What is a Zener diode used for? 学び始める
|
|
Voltage regulation in reverse breakdown mode.
|
|
|
Why use a Schottky diode? 学び始める
|
|
It has a low forward voltage drop and fast switching speed.
|
|
|
What does β represent in BJTs? 学び始める
|
|
The current gain (Ic/Ib).
|
|
|
What does α represent in BJTs? 学び始める
|
|
The ratio of collector current to emitter current (Ic/Ie).
|
|
|
What is the Q-point in a transistor? 学び始める
|
|
The operating point under DC conditions without an input signal.
|
|
|
How does a JFET control current? 学び始める
|
|
By adjusting gate voltage to control the channel width via the depletion layer.
|
|
|
What is pinch-off voltage in a JFET? 学び始める
|
|
The voltage at which drain current levels off and saturates.
|
|
|
What is an enhancement-mode MOSFET? 学び始める
|
|
A transistor that is normally off and requires a positive gate voltage to conduct.
|
|
|
What is a depletion-mode MOSFET? 学び始める
|
|
A transistor that is normally on and turns off with negative gate voltage.
|
|
|
|
学び始める
|
|
A circuit that converts AC to DC using diodes.
|
|
|
|
学び始める
|
|
A measure of residual AC in the DC output of a rectifier.
|
|
|
How does a Zener voltage stabilizer work? 学び始める
|
|
It maintains a constant output voltage by operating in reverse breakdown.
|
|
|
What is a current mirror? 学び始める
|
|
A circuit that duplicates current from one active device to another.
|
|
|
What is Total Harmonic Distortion (THD)? 学び始める
|
|
A measure of distortion caused by harmonics in an amplifier's output.
|
|
|
What is Common Mode Rejection Ratio (CMRR)? 学び始める
|
|
The ability of an amplifier to reject common input signals.
|
|
|
What is amplifier slew rate? 学び始める
|
|
The maximum rate of change of output voltage in response to a step input.
|
|
|
What is Signal-to-Noise Ratio (SNR)? 学び始める
|
|
The ratio of signal power to noise power, typically in decibels (dB).
|
|
|
What defines a Class A amplifier? 学び始める
|
|
Continuous conduction for the full cycle, with high linearity and low efficiency.
|
|
|
What defines a Class B amplifier? 学び始める
|
|
Each transistor conducts for half the cycle (180°); more efficient, but causes crossover distortion.
|
|
|
What defines a Class AB amplifier? 学び始める
|
|
Conducts slightly more than 180° to eliminate crossover distortion.
|
|
|
What defines a Class D amplifier? 学び始める
|
|
Uses PWM and switching transistors for high efficiency.
|
|
|
What is an op-amp buffer used for? 学び始める
|
|
Signal isolation with high input and low output impedance.
|
|
|
What does a Schmitt trigger do? 学び始める
|
|
Converts noisy signals into clean transitions using hysteresis.
|
|
|
What is a differential amplifier? 学び始める
|
|
Amplifies the difference between two signals while rejecting common noise.
|
|
|
What is an integrating amplifier? 学び始める
|
|
Produces output proportional to the integral of the input voltage over time.
|
|
|
What is a differentiating amplifier? 学び始める
|
|
Produces output proportional to the rate of change of the input voltage.
|
|
|
What condition is needed for sustained oscillator operation? 学び始める
|
|
Unity loop gain (βk = 1) and zero net phase shift (Barkhausen criterion).
|
|
|
What is the purpose of a DAC (Digital-to-Analog Converter)? 学び始める
|
|
To convert digital signals into corresponding analog voltages.
|
|
|
