APPROVED DOCUMENT K

 0    58 フィッシュ    sim
mp3をダウンロードする 印刷 遊びます 自分をチェック
 
質問 答え
approved
What is a approved Document?
学び始める
zatwierdzony
Building Regulations
学び始める
Przepisy budowlane
protection from impact
Protection from falling, collision and impact
学び始める
Ochrona przed uderzeniami
impact
The definition of impact is one thing crashing into or having an affect on another.
学び始める
wpływ / zderzenie
ladder
学び始める
drabina
loading bays
学び始める
strefa załadunku
Vehicle barriers
学び始める
Bariery pojazdów
glazing
学び始める
szyby
provisions
Additional provisions for glazing in buildings other than dwellings.
学び始める
Przepisy
dwellings
Additional provisions for glazing in buildings other than dwellings.
学び始める
mieszkaniowe
trapping by doors
trap.
学び始める
uwięzienie przez drzwi
pułapka
compliance with the law
学び始める
zgodność z prawem
workmanship
学び始める
jakość wykonania
Handrail
学び始める
Poręcz
helical stair
helical stair = spiral stair
学び始める
spiralny schody
noising
学び始める
nosek schodów
stair tread
学び始める
stopnica
pitch
学び始める
kąt nachylenia
rise
学び始める
wysokość stopnia
riser
学び始める
wysokość stopnia
landing
The width and length of every landing should be at least as great as the smallest width of the flight. (minimum 1 m)
学び始める
podest / spocznik
staircase
学び始める
klatka schodowa
stair enclosure
学び始める
klatka schodowa
flight of stairs
学び始める
bieg schodów
straight flight stairs
学び始める
Schody jednobiegowe proste
dog-legged stairs
学び始める
Schody dwubiegunowe proste
winding stairs
学び始める
kręte schody
cantiliver stairs
学び始める
schody wspornikowe
timber stairs
学び始める
Schody z drewna
going
going = tread
学び始める
stopnica
RISER in PRIVATE STAIRS
Rise maximum 220mm. RISE = 150mm- 220mm.
学び始める
wysokość stopnia
H = 150mm-220mm
GOING in PRIVATE STAIRS
GOING minimum 220mm. GOING = 220mm- 300mm.
学び始める
SZEROKOŚĆ STOPNIA
intended
Private: intended to be used for only one dwelling.
学び始める
przeznaczony
assembly
Institutional and assembly: Serving a place where many people gather.
学び始める
zgromadzenie
gather
Institutional and assembly: Serving a place where many people gather.
学び始める
zbierać
headroom
Minimum headroom= 2m.
学び始める
wysokość prześwitu
Institutional and assembly stairs
Maximum rise = 180mm. Minimum going 280.(If the area of a floor of the building is less than 100m2, the going may be reduced to 250mm.)
学び始める
Instytucjonalne i zbiorowe schody
Pitch
the maximum pitch for private stair is 42°.
学び始める
kąt nachylenia
gangway for seated spectators
The maximum pitch for gangways for seated spectators is 35°.
学び始める
Przejście na siedzących widzów
escalator
学び始める
schody ruchome
stair well
学び始める
dusza schodów
fire escape stairs
学び始める
schody ewakuacyjne
dividing flights
A stair in a public building which is wider than 1800mm should be divided into flights which are not wider than 1800mm.
学び始める
podzielenie biegu
length of flights
The number of risers in a flight should be limited to 16 if a stair serves an area used as a shop or for assembly purposes.
学び始める
długość biegu
lending next to doors
at least 400mm.
学び始める
spocznik obok drzwi
cupboard
at least 400mm.
学び始める
szafka nad spocznikiem
alternating tread stair
学び始める
zmienny stopień
walkways
学び始める
chodniki
Handrails for stairs
In all buildings hadrail height should be between 900mm and 1000mm measured to the top of the handrail from the pitch line or floor.
学び始める
Poręcze na schodach
guarding
Flights and landings shoul be guarded at the sides (in dewellings) when there is a drop of more than 600mm.
学び始める
osłona / ochrona
drop
学び始める
spadek
guarding
Single family dwellings:1. Stairs, landings, ramps, edges of internal floors. H= 900mm. 2. External balconies and edges of roof. H= 1100mm.
学び始める
osłona / ochrona
suitable handrails for common stairs
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
学び始める
odpowiednie porecze dla powszechnych schodów poręcze
formula
The normal relationship between the dimensions of the rise and going is that twice the rise plus the going (2R+G) should be between 550mm and 700mm.
学び始める
wzór
2R+G = 550mm -700mm
readily
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
学び始める
łatwo
Utility stair
学び始める
schody użyteczności publicznej
external stairs
For dwellings, for external tapered stairs that are part of the buildings, the going should be a minimum of 280mm.
学び始める
schody zewnętrzne
Width of STAIRS
minimum width of 900mm. Landings should be at least the width and length of the minimum width of the fight. For buildings other than dwellings, each landing should have an unobstructed length of at least 1,200m.
学び始める
Szerokość schodów

コメントを投稿するにはログインする必要があります。